DuraShutter Standard Rolling Counter Shutter
Designed for a variety of common applications, DuraShutter Standard rolling counter shutters provide Raynor reliability and durability to meet or exceed the requirements of daily use. Available with the widest selection of quality features and options.
Curtain Hood: Curtain hoods are square and designed for maximum structural rigidity.
Curtain: All DuraShutter curtains are consructed with heavy-duty steel, stainless steel or aluminum slats.
Counterbalance System: A torsion-spring-operated system, enclosed in a structural steel barrel, effectively counterbalances the door for a minimum of 7,500 cycles.
Guides: Guides constructed of steel, stainless steel or aluminum, allow for face or jamb mounting. Wool pile strips inside the guides provide smooth, quiet operation
Bottom Bar: Curtain bottoms are constructed of steel, stainless steel or aluminum with a foam edge to protect the sill.
Locks: Cylinder or thumb-turn locks help keep your building secure. Thumb-turn locks are standard on shutters with manual or crank operation.
Type | Commercial Rolling Counter Shutter | |
Model | DuraShutter STANDARD | |
Mount | Interior | |
Configuration | Single Door | |
Size | 20′ Width, 8′ Height | |
Operation | Manual, Crank-Operated, Tube Motor | |
Drive | Left or Right Hand | |
Slat Type | Flat | |
Endlocks/Windlocks | Zinc Plated Stamped Steel | |
Material | Steel | |
Gauge | 22-Gauge | |
Insulation | N/A | |
Bottom Bar | Tubular Steel | |
Color/Finish | Standard: Gray; Optional ArmorBrite Powdercoated | |
AccuFinish Woodgrain Finish | Oak only | |
Mounting | Face, Jamb or Integral | |
Guide Construction | Fabricated Painted Steel | |
Jamb Construction | Steel, Wood, Masonry or Non-masonry | |
Wear Strips | Wool Pile | |
Color/Finish | Gray or ArmorBrite Powdercoated | |
Type | Torsion Spring System or Tube Motor | |
Head Plates | Thickness: 10-Gauge or 11-Gauge | |
Barrel | Size: 4″, 6″ | |
Springs | Inside Diameters: 2-7/8″, 4-9/16″, 4-7/8″ | |
Bearing Plug Assembly | Removable | |
Shafts | Solid Shaft: 1″, 1-1/4″ | |
Ring-Splits | 4″ Pipe: 5″ Ring, Rubber O-ring | |
Counterbalance Hardware | Includes all required components | |
Hood | Type: Square; Material: Steel | |
Weight Counterbalance Cover | Steel (24 ga.) | |
HeadPlate Cover | N/A | |
Color/Finish | Standard: Gray; Optional ArmorBrite Powdercoated | |
Miscellaneous Parts | Curtain Stops, Hood Support | |
Nuts/Bolts | Headplate Bolts, Lag Screws, Thread Cutters, Masonry Anchors, Hood Screws, Drive Pins | |
Lock | Locking Bars, Thumb Turn Lock, or Cylinder Lock | |
Weather Seal | N/A | |
Pedestrian Door | N/A | |
Counterbalance | 1 Year or Cycle Life | |
Parts | 1-Year |
Custom Colors: Armorbrite™: 187 Custom Powdercoated colors available
Flat Slats |
Perforated Slats |
ArmorBrite™ |
Brush Seals |
Eclipse™ Tube Motor Operation |
Integral Frames |
Crank Operation |
Operators |
Specifications | ||
Raynor Quick Spec | Microsoft Word Document | PDF Document |
CSI Master Format | Microsoft Word Document | PDF Document |
Clearance and Dimension Configurator Use this tool to quickly find the Clearances & Dimensions for a Raynor Rolling Door, based on gauge, slat type and mounting options. |
||
Standard Drawings | ||
For Slat Types: Flat Slat/Stainless Steel (CP) | ||
Interior Face Mount (N) | ||
Manual Operation | DWG Drawing | PDF Document |
Chain Operation | DWG Drawing | PDF Document |
Motor Operation | DWG Drawing | PDF Document |
Between Jamb Mount/Under Lintel (J) | ||
Manual Operation | DWG Drawing | PDF Document |
Chain Operation | DWG Drawing | PDF Document |
Motor Operation | DWG Drawing | PDF Document |
Face-Mounted/Under Lintel (J1) | ||
Manual Operation | DWG Drawing | PDF Document |
Chain Operation | DWG Drawing | PDF Document |
Motor Operation | DWG Drawing | PDF Document |
Between Jamb Only (J2) | ||
Manual Operation | DWG Drawing | PDF Document |
Chain Operation | DWG Drawing | PDF Document |
Motor Operation | DWG Drawing | PDF Document |
DuraShutter Warranty
Curtain
Raynor warrants the curtain and its component parts for one (1) year against defects in material and workmanship.
Hardware & Spring Components
Raynor warrants all hardware and spring components against defects in material and workmanship for one (1) year.
Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for installations or repairs shall be the responsibility of the consumer and must be performed by an authorized Raynor Dealer. This warranty applies only to doors that are professionally installed by an authorized Raynor Dealer.
This warranty extends only to the original purchaser. This warranty is not transferable.
This warranty does not apply to any damage or deterioration caused by abuse, applied paint failure or failure to provide reasonable and necessary maintenance.
Raynor shall not be liable for any consequential or incidental damages.
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY, ARE HEREBY EXPRESSLY EXCLUDED.
Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.
Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.
This warranty gives you specific legal rights. You may also have other rights, which may vary from state to state.