skip to Main Content

TM 200 Thermaseal Steel Commercial Sectional Garage Door

The ultimate choice for thermal protection is the ThermaSeal TM200. With an R-Value of 18.3, this 2″ thick steel garage door is the most energy efficient of the ThermaSeal line. With all the standard features you expect from ThermaSeal door, the TM200 is a great fit for a variety of applications demanding performance.

Click for larger exterior view3 Layers2 inches thick

Door
Type Commercial Sectional Garage Doors
Model ThermaSeal TM200
Size 36′ x 22′
Operation Manual, Motor or Hand Chain
Sections
Construction 3-Layer Sandwich
Material Steel
Surface Texture Stucco Exterior, Stucco Interior
Section Joint Ship Lap
Section Thickness 2″
Gauge Steel; Exterior: 26-Gauge; Interior: 26-Gauge
Stiles 16-Gauge
Insulation Polyurethane (R-value = 18.3)
Seals Thermal Break, Bottom Seal (3″, 4″ EPDM, or 3″ Yellow); Optional Header Seal
Trussing Windload: 20 P.S.F.(88 m.p.h. standard); Material: U-bar 4″, 6″, or 8″ sizes
Panel Configuration NA
Color White
Windows Select 24″ x 8″, 24″ x 12″ rigid frame or full-view window in 34″ x 16″. Choose from clear insulated glass and clear insulated tempered.
Track
Type Normal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour
Finish Galvanized
Size 2″ or 3″
Gauge Minimum 16-gauge
Counterbalance System
Type Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counter-Balance
Springs Spring Inner Diameter: 2-1/4″, 3-1/2″ or 5-1/2″; Duplex or High Cycle (30K, 50K, 100K)
Shafts Tube (13 gauge) or Solid (D-Shaft, 1″ Keyed, 1-1/4″ Keyed)
Hardware/Accessories
Hinges 11, 13, 14-Gauge or Hybrid
Rollers Standard (2″ or 3″) or Heavy Duty (2″ or 3″)
Finish Galvanized
Lock Interior Slide Lock or Exterior Lock Bars
Seal Header Seal or Jamb Seal
Hanger Angle 11, 13, 16-Gauge
Pedestrian Door NA
Optional Wind Loading NA
Posts Swing-Up or Carry-Away
Limited Warranty *
Section Warranty 10-Year Rust-Through and Delamination
Hardware Warranty 1-Year
Spring Warranty 1-Year
*See ‘warranty’ tab above for complete details

 

Adobe Acrobat PDFDownload ThermaSeal Brochure PDF file

 

Colors

All ThermaSeal TM200 doors are available in White.

White

Options
Windows
Windows
High-Cycle Counterbalance Systems
High-Cycle Counterbalance Systems
Jamb Seal
Perimeter Seal
Locks
Locks
Customized Track and Hardware Systems
Customized Track and Hardware Systems
Removeable Center Posts
Removeable
Center Posts
Carbon Monoxide Vent
Carbon Monoxide Vent
Operators
Operators

 

Adobe Acrobat PDFDownload ThermaSeal Brochure PDF file

 

Specifications Word Document PDF document
Raynor Quick Spec Microsoft Word Document PDF Document
CSI Master Format Microsoft Word Document PDF Document

 

Adobe Acrobat PDFDownload ThermaSeal Brochure PDF file

 

Track Selection Guide
Normal Headroom
Normal Headroom
Lift Clearance
Lift Clearance
Low Headroom (Front Mount)
Low Headroom (Front Mount)
Low Headroom (Rear Mount)
Low Headroom (Rear Mount)
Vertical Lift
Vertical Lift
Incline
Incline
Contour
Vertical Lift A-Type

 

Section and Panel Schedules
 Door Width  Number of Raised Panels  Door Height  Number of Sections
5′ 3″ – 9′ 2″ 2 Up to 8′ 2″ 4
9′ 3″ – 12′ 2″ 3 8′ 3″ – 10′ 2″ 5
12′ 3″ – 16′ 2″ 4 10′ 3″ – 12′ 2″ 6
16′ 3″ – 20′ 2″ 5 12′ 3″ – 14′ 2″ 7
24′ 3″ – 28′ 2″ 7 16′ 3″ – 18′ 2″ 9
20′ 3″ – 24′ 2″ 6 14′ 3″ – 16′ 2″ 8
18′ 3″ – 20′ 2″ 10

 

Adobe Acrobat PDFDownload ThermaSeal Brochure PDF file

ThermaSeal Series Warranty

DOOR SECTIONS

Raynor® warrants the door sections against defects in material and workmanship, and deterioration due to rust-through for ten (10) years from date of delivery to the original purchaser. Raynor also warrants the door sections against delamination of the polyurethane foam insulation from the steel skins for ten (10) years from date of delivery to the original purchaser. Window components are warranted against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.

HARDWARE and SPRINGS

Raynor warrants all hardware and spring components against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.

OPTIFINISH™ (post paint)

Raynor warrants the OptiFinish (exterior only) against cracking or peeling (losing adhesion) for one (1) year from date of delivery to the original purchaser. Cracking or peeling caused by dents or scratches is not covered. Fading is not covered by this warranty.

WARRANTY LIMITATIONS and EXCLUSIONS

Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for the installation or repairs shall be the responsibility of the consumer and must be performed by an authorized Raynor dealer.

This warranty extends only to the original purchaser, provided the door is installed in his/her place of business. This warranty is not transferable.

This warranty does not apply to any damage or deterioration to the door caused by abuse, negligence, missing components, accidents, use of pressure washers, dents or scratches. Shavings from trolley rails not properly removed and cleaned from the exterior door surface causing rust are not covered by this warranty. Failure to provide proper maintenance voids this warranty. Field applied paint failure is not covered by this warranty. Refer to the Care and Maintenance Instructions and Painting Instructions.

This warranty does not apply to damage caused by fire, an act of God, accident, vandalism or graffiti. Damage or deterioration caused by saltwater coastal areas (within two miles), hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers is not covered by this warranty.

Raynor shall not be liable for any consequential or incidental damages.

ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANT OF MERCHANTABILITY, ARE HEREBY EXPRESSLY EXCLUDED.

Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.

Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase and photographs of the product in question to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.

This warranty gives you specific legal rights. You may also have other rights, which may vary from state to state.

 

Adobe Acrobat PDFDownload ThermaSeal Brochure PDF file

Cart

Back To Top