DuraCoil Standard Commercial Rolling Service Door
Download DuraCoil Brochure PDF file
Type | Commercial Rolling Service Door | |
Model | DuraCoil STANDARD | |
Mount | Interior or Exterior | |
Configuration | Single Door or Door-Behind-A-Door | |
Size | Widths to 30′ Heights 30′ | |
Operation | Manual, Hand Chain, Crank-Operated, Through-Wall, Motor: Bracket or Wall Mount | |
Drive | Left or Right Hand | |
Slat Type | Small Contour, Large Contour, Flat, Flat Insulated, Perforated | |
Endlocks/Windlocks | Zinc Plated Malleable Cast Iron | |
Material | Steel | |
Gauge | 20-, 22-, 24-Gauge | |
Insulation | Poly-Isocyanurate | |
Bottom Bar | Hot-Rolled or Cold Rolled Galvanized Steel Angles | |
Color/Finish | Standard: Gray or Tan (Only on Flat Slat); Optional ArmorBrite Powdercoated or Galvanized | |
Vision Panels | 4″ x 1″ | |
Wear Straps | Polyester Belt | |
Mounting | Face (E or Z) or Jamb | |
Guide Construction | Hot-Rolled Steel Angle | |
Jamb Construction | Steel, Wood, Masonry or Non-masonry | |
Wear Strips | Polyethylene Tape (UHMW) | |
Color/Finish | Black, Galvanized or ArmorBrite Powdercoated | |
Type | Torsion Spring System (Standard or High-Cycle) or FeatherLite Weight Counterbalance | |
Head Plates | Thickness: 3/16″, 1/4″, 3/8″, 1/2″ | |
Barrel | Size: 4″, 6″, 8″, 10″, 12″, 14″ | |
Springs | Inside Diameters: 2-7/8″, 4-9/16″, 4-7/8″, 6-1/4″, 8-3/8″, 10-1/2″ | |
Bearing Plug Assembly | Removable: 4″ or 6″; Welded: 8″, 10″, 12″, 14″ | |
Shafts | Solid Shaft: 1″, 1-1/4″, 1-1/2″, 1-3/4″, 2″, 2-1/2″ | |
Ring-Splits | 4″ Pipe: 7″, 7-1/2″, or 8″ Ring; 6″ Pipe: 9″ Ring | |
Counterbalance Hardware | Includes all required components | |
Hood | Type: Round or Square; Material: Steel | |
Weight Counterbalance Cover | 24-Gauge Steel | |
HeadPlate Cover | Steel | |
Color/Finish | Standard: Gray or Tan; Optional ArmorBrite Powdercoated | |
Miscellaneous Parts | Curtain Stops, Hood Support | |
Nuts/Bolts | Headplate Bolts, Lag Screws, Thread Cutters, Masonry Anchors, Hood Screws, Drive Pins | |
Lock | Locking Bars, Hand-Chain Lock, Thumb Turn Lock, or Cylinder Lock | |
Weather Seal | Header Brush, Vinyl Guide Seal, Hood Baffle, Guide Brush | |
Pedestrian Door | 2′-6″ x 6′-8″ or 3′ x 7″ | |
Counterbalance | 1 Year or Cycle Life | |
Parts | 1-Year |
Custom Colors: Armorbrite™: 187 Custom Powdercoated colors available
Flat Slats |
Flat Insulated Slats |
Flat Perforated Slats |
Large Contour Slats |
Small Contour Slats |
ArmorBrite™ |
High-Cycle Applications |
Vision Panels |
Pedestrian Doors |
Hood Weatherseal |
Vinyl Guide Seal |
Brush Guide Seal |
Operators |
Specifications | ||
Raynor Quick Spec | Microsoft Word Document | PDF Document |
CSI Master Format | Microsoft Word Document | PDF Document |
Clearance and Dimension Configurator Use this tool to quickly find the Clearances & Dimensions for a Raynor Rolling Door, based on gauge, slat type and mounting options. |
||
Standard Drawings | ||
For Slat Types: Insulated Flat (IF), Flat (FF), Small Contour (SC), Large Contour (LC), Perforated Flat (FP) | ||
Interior Face Mount (N) | ||
Manual Operation | DWG Drawing | PDF Document |
Chain Operation | DWG Drawing | PDF Document |
Crank Operation | DWG Drawing | PDF Document |
Motor Operation | DWG Drawing | PDF Document |
Between Jamb Mount/Under Lintel (J) | ||
Manual Operation | DWG Drawing | PDF Document |
Chain Operation | DWG Drawing | PDF Document |
Crank Operation | DWG Drawing | PDF Document |
Motor Operation | DWG Drawing | PDF Document |
Face-Mounted/Under Lintel (J1) | ||
Manual Operation | DWG Drawing | PDF Document |
Chain Operation | DWG Drawing | PDF Document |
Crank Operation | DWG Drawing | PDF Document |
Motor Operation | DWG Drawing | PDF Document |
Between Jamb Only (J2) | ||
Manual Operation | DWG Drawing | PDF Document |
Chain Operation | DWG Drawing | PDF Document |
Crank Operation | DWG Drawing | PDF Document |
Motor Operation | DWG Drawing | PDF Document |
DuraCoil Warranty
Door Curtain
Raynor warrants the door and its component parts for one (1) year against defects in material and workmanship.
Hardware & Spring Components
Raynor warrants all hardware and spring components against defects in material and workmanship for one (1) year.
Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for installations or repairs shall be the responsibility of the consumer and must be performed by an authorized Raynor Dealer. This warranty applies only to doors that are professionally installed by an authorized Raynor Dealer.
This warranty extends only to the original purchaser. This warranty is not transferable.
This warranty does not apply to any damage or deterioration caused by abuse, applied paint failure or failure to provide reasonable and necessary maintenance.
Raynor shall not be liable for any consequential or incidental damages.
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY, ARE HEREBY EXPRESSLY EXCLUDED.
Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.
Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.
This warranty gives you specific legal rights. You may also have other rights, which may vary from state to state.