DuraCoil Select Commercial Rolling Service Door
Download DuraCoil Brochure PDF file
Type | Commercial Rolling Service Door | |
Model | DuraCoil SELECT | |
Mount | Interior or Exterior | |
Configuration | Single Door or Door-Behind-A-Door | |
Size | 24′ with Slat Restrictions | |
Operation | Manual, Hand Chain, Crank-Operated, Through-Wall Motor: Bracket or Wall Mount | |
Drive | Left or Right Hand | |
Slat Type | Flat, Flat Insulated, Perforated (Aluminum Only) | |
Endlocks/Windlocks | Zinc Plated Malleable Cast Iron | |
Material | Stainless Steel and Aluminum | |
Gauge | 20- and 22-Gauge (Stainless Steel); .04″, .05″ (Aluminum) | |
Insulation | Poly-Isocyanurate | |
Bottom Bar | Stainless Steel or Aluminum Angles | |
Color/Finish | Stainless Steel (#4), Clear Anodized, Bronze Anodized | |
Vision Panels | 4″ x 1″ | |
Wear Straps | Polyester Belt | |
Mounting | Face (E or Z) or Jamb | |
Guide Construction | Hot-Rolled Steel Angle, Extruded Aluminum, Hot-Rolled Stainless Steel | |
Jamb Construction | Steel, Wood, Masonry or Non-masonry | |
Wear Strips | UHMW Tape or Wool Pile | |
Color/Finish | Black, Galvanized, Satin Stainless, Bronze Anodized, Clear Anodized, ArmorBrite Powdercoated | |
Type | Torsion Spring System (Standard or High-Cycle) or FeatherLite Weight Counterbalance | |
Head Plates | Thickness: 3/16″, 1/4″, 3/8″, 1/2″ | |
Barrel | Size: 4″, 6″, 8″, 10″, 12″, 14″ | |
Springs | Inside Diameters: 2-7/8″, 4-9/16″, 4-7/8″, 6-1/4″, 8-3/8″, 10-1/2″ | |
Bearing Plug Assembly | Removable: 4″ or 6″; Welded: 8″, 10″, 12″, 14″ | |
Shafts | Solid Shaft: 1″, 1-1/4″, 1-1/2″, 1-3/4″, 2″, 2-1/2″, 3″ | |
Ring-Splits | 4″ Pipe: 7″, 7-1/2″, or 8″ Ring; 6″ Pipe: 9″ Ring | |
Counterbalance Hardware | Includes all required components | |
Hood | Type: Round or Square; Material: Steel or Aluminum | |
Weight Counterbalance Cover | 24-Gauge Steel | |
HeadPlate Cover | Steel, Stainless Steel (24-Gauge), Aluminum (.04″) | |
Color/Finish | Stainless Steel (#4), Bronze Anodized, Clear Anodized, ArmorBrite Powdercoated | |
Miscellaneous Parts | Curtain Stops, Hood Support | |
Nuts/Bolts | Headplate Bolts, Lag Screws, Thread Cutters, Masonry Anchors, Hood Screws, Drive Pins | |
Lock | Locking Bars, Hand-Chain Lock, Cylinder Lock | |
Weather Seal | Header Brush, Vinyl Guide Seal, Hood Baffle, Guide Brush | |
Pedestrian Door | 2′-6″ x 6′-8″ or 3′ x 7″ | |
Counterbalance | 1 Year or Cycle Life | |
Parts | 1-Year |
Slat Material
Stainless Steel, Aluminum
Options
|
Specifications | ||
Raynor Quick Spec | Microsoft Word Document | PDF Document |
CSI Master Format | Microsoft Word Document | PDF Document |
Clearance and Dimension Configurator Use this tool to quickly find the Clearances & Dimensions for a Raynor Rolling Door, based on gauge, slat type and mounting options. |
||
Standard Drawings | ||
For Slat Types: Flat Insulated/Aluminum or Stainless Steel (AI), Flat/Aluminum or Stainless Steel (AF), Perforated Flat/Aluminum (AP) | ||
Interior Face Mount (N) | ||
Manual Operation | DWG Drawing | PDF Document |
Chain Operation | DWG Drawing | PDF Document |
Crank Operation | DWG Drawing | PDF Document |
Motor Operation | DWG Drawing | PDF Document |
Between Jamb Mount/Under Lintel (J) | ||
Manual Operation | DWG Drawing | PDF Document |
Chain Operation | DWG Drawing | PDF Document |
Crank Operation | DWG Drawing | PDF Document |
Motor Operation | DWG Drawing | PDF Document |
Face-Mounted/Under Lintel (J1) | ||
Manual Operation | DWG Drawing | PDF Document |
Chain Operation | DWG Drawing | PDF Document |
Crank Operation | DWG Drawing | PDF Document |
Motor Operation | DWG Drawing | PDF Document |
Between Jamb Only (J2) | ||
Manual Operation | DWG Drawing | PDF Document |
Chain Operation | DWG Drawing | PDF Document |
Crank Operation | DWG Drawing | PDF Document |
Motor Operation | DWG Drawing | PDF Document |
DuraCoil Warranty Door Curtain Hardware & Spring Components Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for installations or repairs shall be the responsibility of the consumer and must be performed by an authorized Raynor Dealer. This warranty applies only to doors that are professionally installed by an authorized Raynor Dealer. This warranty extends only to the original purchaser. This warranty is not transferable. This warranty does not apply to any damage or deterioration caused by abuse, applied paint failure or failure to provide reasonable and necessary maintenance. Raynor shall not be liable for any consequential or incidental damages. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY, ARE HEREBY EXPRESSLY EXCLUDED. Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you. Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection. This warranty gives you specific legal rights. You may also have other rights, which may vary from state to state.
|