DuraCoil Basic Commercial Rolling Service Door
|
This 24-gauge product with roll-formed guides is a simple solution for typical applications requiring Raynor quality and durability.
|
| Type | Commercial Rolling Service Door | |
| Model | DuraCoil BASIC | |
| Mount | Interior or Exterior | |
| Configuration | Single Door | |
| Size | 14′ x 14′ Maximum | |
| Operation | Manual, Hand Chain, Crank-Operated, Wall Mount Motor | |
| Drive | Left or Right Hand | |
| Slat Type | Flat | |
| Endlocks/Windlocks | Zinc Plated Stamped Steel | |
| Material | Steel | |
| Gauge | 24-Gauge | |
| Insulation | N/A | |
| Bottom Bar | Roll-Formed Galvanized | |
| Color/Finish | Standard: Gray or Tan | |
| Vision Panels | 4″ x 1″ | |
| Wear Straps | Polyester Belt | |
| Mounting | Face (E or Z) or Jamb | |
| Guide Construction | Roll-Formed Galvanized Steel | |
| Jamb Construction | Steel, Wood, Masonry or Non-masonry | |
| Wear Strips | N/A | |
| Color/Finish | Galvanized | |
| Type | Torsion Spring System | |
| Head Plates | Thickness: 10-Gauge | |
| Barrel | Size: 4″ Min. | |
| Springs | Inside Diameter: 2-7/8″ Min. | |
| Bearing Plug Assembly | Removable | |
| Shafts | Solid Shaft: 1″ or Tube: 1″ | |
| Ring-Splits | 4″ Pipe: 7″, 7-1/2″ | |
| Counterbalance Hardware | Includes all required components | |
| Hood | (Optional) Type: Round; Material: Steel | |
| Weight Counterbalance Cover | N/A | |
| HeadPlate Cover | (Optional) | |
| Color/Finish | Tan, Gray | |
| Miscellaneous Parts | Curtain Stops, Hood Support | |
| Nuts/Bolts | Headplate Bolts, Lag Screws, Thread Cutters, (Optional)Masonry Anchors, Hood Screws, Drive Pins | |
| Lock | Locking Bars, Hand-Chain Lock, Cylinder Lock | |
| Weather Seal | Header Brush, Hood Baffle, Guide Brush, Guide Vinyl Seal | |
| Pedestrian Door | N/A | |
| Counterbalance | 1 Year or Cycle Life | |
| Parts | 1-Year | |
|
Finishes
Standard: Gray, Tan
Options
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DuraCoil Warranty
Door Curtain
Raynor warrants the door and its component parts for one (1) year against defects in material and workmanship.
Hardware & Spring Components
Raynor warrants all hardware and spring components against defects in material and workmanship for one (1) year.
Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for installations or repairs shall be the responsibility of the consumer and must be performed by an authorized Raynor Dealer. This warranty applies only to doors that are professionally installed by an authorized Raynor Dealer.
This warranty extends only to the original purchaser. This warranty is not transferable.
This warranty does not apply to any damage or deterioration caused by abuse, applied paint failure or failure to provide reasonable and necessary maintenance.
Raynor shall not be liable for any consequential or incidental damages.
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY, ARE HEREBY EXPRESSLY EXCLUDED.
Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.
Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.
This warranty gives you specific legal rights. You may also have other rights, which may vary from state to state.