TH 160 Sectional Thermal Garage Door
For maximum thermal protection, choose Raynor’s TH160, our durable, energy-efficient sectional garage door. Our exclusive process fills 100% of the door’s interior space with energy-saving polyurethane foam insulation to deliver exceptional R-values. This process also provides superior foam density for excellent structural integrity. With standard features like the corrosive resistant rigid aluminum retainer and the EPDM rubber floor seal, the TH160 is built to last!
| Type | Commercial Sectional Garage Doors | |
| Model | TH160 | |
| Size | 24′ x 22′ Max | |
| Operation | Manual, Motor or Hand Chain | |
| Construction | 3-Layer Sandwich | |
| Material | Steel | |
| Surface Texture | Stucco Exterior, Stucco Interior | |
| Section Joint | Ship Lap | |
| Section Thickness | 1-5/8″ | |
| Gauge | Exterior Steel Thickness 0.015″ | |
| Stiles | 16-Gauge | |
| Insulation | Polyurethane (R-value = 14.86) | |
| Seals | Thermal Break, Bottom Seal (3″) | |
| Trussing | Windload: 20 P.S.F.(76 m.p.h.) (standard); Material: U-bar 4″, 6″, or 8″ sizes | |
| Panel Configuration | NA | |
| Color | White | |
| Windows | 24″x12″ two piece acrylic, clear insulated glass, clear insulated tempered | |
| Type | Normal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour | |
| Finish | Galvanized | |
| Size | 2″ or 3″ | |
| Gauge | 12, 13, 16-gauge | |
| Type | Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counter-Balance | |
| Springs | Spring Inner Diameter: 2-1/4″, 3-1/2″ or 5-1/2″; Duplex or High Cycle (30K, 50K, 100K) | |
| Shafts | Tube (13 gauge) or Solid (D-Shaft, 1″ Keyed, 1-1/4″ Keyed) | |
| Hinges | 11, 13, 14-Gauge or Hybrid | |
| Rollers | Standard (2″ or 3″) or Heavy Duty (2″ or 3″) | |
| Finish | Galvanized | |
| Lock | Interior Slide Lock | |
| Seal | Header Seal or Jamb Seal | |
| Hanger Angle | 11, 13, 16-Gauge | |
| Pedestrian Door | NA | |
| Optional Wind Loading | NA | |
| Posts | NA | |
| Section Warranty | 10-Year Rust-Through and Delamination | |
| Hardware Warranty | 1-Year | |
| Spring Warranty | 1-Year | |
| *See ‘warranty’ tab above for complete details | ||
 Windows |
 High-Cycle Counterbalance Systems |
 Perimeter Seal |
 Customized Track and Hardware Systems |
 |
|
|
|
 Carbon Monoxide Vent |
 Operators |
||
|
 Normal Headroom |
 Lift Clearance |
 Low Headroom (Front Mount) |
 Low Headroom (Rear Mount) |
|
|
|
|
 Vertical Lift |
 Incline |
 Vertical Lift A-Type |
| Garage Door Width | Number of Raised Panels | Garage Door Height | Number of Sections | |
|---|---|---|---|---|
| 5′ 3″ – 9′ 2″ | 2 |  |
Up to 8′ 2″ | 4 |
| 9′ 3″ – 12′ 2″ | 3 | 8′ 3″ – 10′ 2″ | 5 | |
| 12′ 3″ – 16′ 2″ | 4 | 10′ 3″ – 12′ 2″ | 6 | |
| 16′ 3″ – 20′ 2″ | 5 | 12′ 3″ – 14′ 2″ | 7 | |
| 24′ 3″ – 28′ 2″ | 7 | 16′ 3″ – 18′ 2″ | 9 | |
| 20′ 3″ – 24′ 2″ | 6 | 14′ 3″ – 16′ 2″ | 8 | |
| 18′ 3″ – 20′ 2″ | 10 |
Door Sections
warrants the door sections against defects in material and workmanship, and deterioration due to rust-through for ten (10) years from date of delivery to the original purchaser. Raynor also warrants the door sections against delamination of the polyurethane foam insulation from the steel skins for ten (10) years from date of delivery to the original purchaser. Window components are warranted against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.
Hardware & Spring Components
Raynor warrants all hardware and spring components against defects in material and workmanship for one (1) year.
OPTIFINISH™ (post paint)
Raynor warrants the OptiFinish (exterior only) against cracking or peeling (losing adhesion) for one (1) year from date of delivery to the original purchaser. Cracking or peeling caused by dents or scratches is not covered. Fading is not covered by this warranty.
WARRANTY LIMITATIONS and EXCLUSIONS
Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for the installation or repairs shall be the responsibility of the consumer and must be performed by an authorized Raynor dealer.
This warranty extends only to the original purchaser, provided the door is installed in his/her place of business. This warranty is not transferable.
This warranty does not apply to any damage or deterioration to the door caused by abuse, negligence, missing components, accidents, use of pressure washers, dents or scratches. Shavings from trolley rails not properly removed and cleaned from the exterior door surface causing rust are not covered by this warranty. Failure to provide proper maintenance voids this warranty. Field applied paint failure is not covered by this warranty. Refer to the Care and Maintenance Instructions and Painting Instructions.
This warranty does not apply to damage caused by fire, an act of God, accident, vandalism or graffiti. Damage or deterioration caused by saltwater coastal areas (within two miles), hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers is not covered by this warranty.
Raynor shall not be liable for any consequential or incidental damages.
ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANT OF MERCHANTABILITY, ARE HEREBY EXPRESSLY EXCLUDED.
Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.
Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase and photographs of the product in question to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.
This warranty gives you specific legal rights. You may also have other rights, which may vary from state to state.